Page 3
3000 MANUAL - FORM 3000-003
02/07
MODEL 3000 SINGLE/OUTSWING
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
Inspect the door frame and determine if an angle bracket or fi ller plate will be required for installation. The lock will
require a 2” wide header stop for a suitable mounting surface.
MOUNTING CONSIDERATIONS
USING THE TEMPLATE
Fold the template on the dotted line to form a 90 degree
angle. Scoring the template with a straight edge and a
screwdriver will make it fold easier.
With the door in the closed and latched position, from
the push side, place the template against the header
and door with one edge against the vertical strike jamb
and tape in place.
Transfer all hole locations to both the door and header
with a center punch, then remove the template from
the door.
Referring to the template drill two 1/8” dia. lock
mounting holes (or tap for 10-24) and one 9/16” dia.
wiring hole in the top of the frame, at the transferred
locations. Remaining mounting holes will be drilled
after lock is fi rst mounted and adjusted (page 6).
1.
2.
3.
4.
Drill the remaining transferred holes in the face of the door to accept the Armature following the instructions
on page 4 for your specifi c door type.
5.
*See Price Book or Call DynaLock Corp.
NORMAL
MOUNTING
FILLER PLATE
REQUIRED*
SPACER PLATE
REQUIRED*
ANGLE BRACKET
REQUIRED*
CARDBOARD
TEMPLATE
HINGE SIDE
OF DOOR
9/16" DIA. WIRING HOLE
1/8" DIA. DRILL
PLACE AGAINST HEADER
FOLD ON DOTTED LINE
PLACE AGAINST JAMB
OPPOSITE HINGES FOR
R.H.R. DOOR INSTALLATION
PLACE AGAINST JAMB
OPPOSITE
HINGES FOR
R.H.R.
DOOR INSTALLATION
1/8” DIA. ARMATURE HOUSING MOUNTING
SCREW HOLES 5/8” DEEP (4 REQ'D.)
1/8” DIA. ARMATURE HOUSING MOUNTING
SCREW
HOLES 5/8” DEEP (4 REQ'D.)
11/32" DIA. DRILL FOR THRU BOLT MOUNTING OR
5/16”-18 TAP FOR MOUNTING ON REINFORCED DOOR
(SEE INSTRUCTIONS)
11/32" DIA. DRILL FOR THRU BOLT MOUNTING OR
5/16”-18 TAP FOR
MOUNTING ON REINFORCED DOOR
(SEE
INSTRUCTIONS)
3000-RHR SERIES
ELECTROMAGNETIC
LOCK
3000-RHR SERIES
ELECTROMAGNETIC
LOCK
DynaLock
USE THIS SIDE OF TEMPLATE
FOR R.H.R. D0OR.
FINISHED INSTALLATION
SHOULD APPEAR ASABOVE.
USE THIS SIDE OF TEMPLATE
FOR
R.H.R. D0OR.
FINISHED
INSTALLATION
SHOULD APPEAR ASABOVE.
2-3/16”
2-3/16”
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern